Product Range Details:
Conveyor belting designed for the ultimate resistance to abrasion. Equivalent to DIN-W grade with less than 90 mm³ abrasion loss and DIN-Y with less than 80 mm³ abrasion loss, these conveyor belts are developed to assure you of the longest belt lifetime. The combination of polyester in warp and nylon infilling provides technical low-stretch, high impact abuse resistance. Recommended for transporting abrasive materials, such as glass, cullet, granite, trap rock, etc.
Fire retardant conveyor belting designed for the service conditions of the mining industry. Suitable for mining, power plants, electric utilities, and coal cleaning plants. Different rubber compounds are available to meet your requirements.Product Range Details:
FR-1 grade is specially compounded rubber over rubber for the underground operation requiring fire resistance, static conductivity. The important characteristic is self-extinguishable cover rubber.
Product Range Details:
- Width – 750 mm to 1830 mm (30” to 72”)
- Type – 250 PIW to 1500 PIW (610 kN/m to 2625 kN/m)
- Covers – Grain PVC (Up to 3.0 mm)
- Special Covers – Available for abrasion, heat and oil resistance.
- Roll Length – As required by customer subject to shipment restrictions by road and sea.
- Color – Black, however special colored PVC covers can be made on request.
- Special Weave Constructions – Load impact bearing, high-tear, and rip resistant available.
Performance proven heat resistant conveyor belting recommended to protect conveyor belting from surface cracking and hardening by heat from hot service applications like hot sintered ore, hot pellet, hot clinker, hot chemical, fertilizer and hot cement, etc. Heat and abrasion resistant cover rubber has been heat treated and dipped to minimize carcass shrinkage and heat aging.
Please see the table below to get an idea of your needs based on materials transported on belting.
Materials and Belt Surface Temperatures
| Materials Carried | Lump Size | Temperature of Material Carried | Belt Surface Temperature |
|---|---|---|---|
| Sintered Ore | 25-200 mm (1-8 inch) | 200-400ºC (390-750ºF) | 130-150ºC (270-300ºF) |
| Return of Sintered Ore | Below 10 mm (0.4 inch) | 260ºC (480ºF) | 150-190ºC (300-370ºF) |
| Coke | 100-200 mm (4-8 inch) | 70-100ºC (160-210ºF) | 50-60ºC 120-140ºF) |
| Raw Material | Below 30 mm (1.2 inch) | 180-220ºC (360-410ºF) | 100-120ºC (210-250ºF) |
| Clinker | 10-30 mm (0.4 – 1.2 inch) | 100-220ºC (210-440ºF) | 100-110ºC (210-230ºF) |
| Cement | Powder | 100-125ºC (210-250ºF) | 80-90ºC (170-190ºF) |
| Metal Powder | – | 170ºC (340ºF) | 120-130ºC (250-270ºF) |
| Molding Sand | – | 200-250ºC (390-480ºF) | 80-90ºC (170-190ºF) |
Heat resistant belts are best suited for conveying product that is over 60º (140º F). The surface temperature of heat resistant belting varies with the material type, belt speed, loading rate and size. To select the proper heat resistant belting, consider not only the material temperature to be conveyed but the surface temperature of the belt as well.
Belting with cover rubber compounded for applications requiring resistance to oils. Outstanding abrasion, ozone and weather resistance. Recommended for conveyor lines prone to swelling and sponginess due to contact with oils.
Product Range Details
SOR grade has excellent resistance for the toughest applications such as oil-treated coal, and petroleum based oils.
OR-200 grade has superior oil resistance to various kinds of animal and vegetable oil with cold temperature.
MOR grade is for moderate oil resistant operations like wood chips, linseed, cottonseed, and whole soybeans where static conductivity is needed.
Product Range Details:
- Width 500 mm to 2200 mm (20″ to 86″)
- Covers up to 8.0 mm.
- Very high tension rating.
- Lower elongation reduces the length of take-up.
- Excellent adhesion between steel cord and rubber to resist flex, fatigue, and impact.
- Excellent troughability.
- Excellent for long distance, high speed carrying of materials.
- Long service life with low maintenance needed.
Transverse reinforcement is available on our steel cord belt for more strength or nylon for some strength and some flexibility. The reinforcement layer is available on both sides of the rubber core or on one side of the core, based on use or customer specification. The layers add protection to the core layer enhancing rip resistance, belt life, and cord protection.
Disclaimer
MHE Experts LLC., provides information, both written and verbal, for its products which it believes to be both accurate and representative of the products themselves. This information is based on laboratory tests, Quality Control
Reports, and previous experience with these products. This general information is offered as a service only and is not meant as an expression of warranty or the suitability of the product for a particular application.
MHE Experts LLC., does not assume any liability whatsoever in regard to use of the product or its fitness for use in a given application.
The buyer of MHE Experts LLC.’s products must determine for themselves the suitability of such products for a given purpose of the buyer.
MHE Experts LLC., reserves the right to alter the technical specification of this product without prior notice.